MSP_RAW_GPS already reports a fixType byte (0=no fix, 1=2D, 2=3D) but
only a collapsed hasFix bool was surfaced past the parser. Thread
fixType through TelemetryFrame and show it as a color-coded field in
the status grid, alongside the already-parsed but previously unshown
flight mode string. Arming/Temperatures/Flight mode is now a 3-column
row, and GPS fix type/GPS satellites/GPS precision (HDOP) another.
MSP_RAW_GPS liefert bereits eine eigene Hoehe (gpsSol.llh.alt, Offset 10,
u16 Meter) - bislang ungenutzt/uebersprungen. Jetzt als eigenes Feld
(MspGpsReading.altitudeM -> TelemetryFrame.gpsAltitudeM) geparst und im
selben "Altitude"-Feld wie die bisherige barometrisch/GPS-fusionierte
Schaetzung angezeigt ("120 m (GPS 119 m)"), statt einer eigenen Kachel -
nur bei vorhandenem Fix angehaengt, analog zur bestehenden hasFix-Handhabung
bei GPS coordinates/HDOP.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Neue Zeile ganz oben mit farblich kodierten Sensor-Badges (ACC/BARO/MAG/
GPS/RNG/OF/PITOT/TEMP, aus dem sensorStatus-Bitfeld von MSP2_INAV_STATUS,
zuvor schon dokumentiert aber ungenutzt), darunter ein Zeilenpaar fuer
Arming-Status und die ersten 3 Temperatursensoren (neu: MSP2_INAV_
TEMPERATURES, 0x201E). Ans Ende der Liste die Steig-/Sinkrate (vario aus
MSP_ALTITUDE, bislang nur die Hoehe selbst wurde daraus gelesen).
- msp_commands.dart: inavTemperatures-Konstante ergaenzt; die Sensor-
Status-Bits (bisher nur als Doc-Kommentar bei MSP2_INAV_STATUS notiert)
zu echten Konstanten (MspSensorStatusBits) promoviert, da jetzt
tatsaechlich gebraucht.
- msp_telemetry_codec.dart: parseMspAltitudeVerticalSpeedMs,
parseMspInavStatusSensorStatus, parseMspInavTemperaturesC ergaenzt +
Unit-Tests.
- TelemetryFrame: sensorStatusBits (Bitmaske, protokollneutral
durchgereicht wie navMode), temperaturesC (erste 3 Sensoren, null je
nicht konfiguriertem Slot), verticalSpeedMs.
- msp_telemetry_poller.dart: vario kommt aus derselben MSP_ALTITUDE-
Antwort wie die Hoehe (keine zusaetzliche Anfrage), sensorStatus aus
derselben MSP2_INAV_STATUS-Antwort wie ARMED; MSP2_INAV_TEMPERATURES neu
im 2-Hz-Statuszyklus abgefragt.
- MockFlightControllerLink: synthetische Sensor-/Temperatur-/Vario-Werte
(kein Pitot/Rangefinder/Opflow am T1 Ranger vorgesehen), leicht
schwankend, damit die neuen Felder auch ohne Hardware sichtbar auf
Werteaenderungen reagieren.
- drone_status_messages_panel.dart: eigene Sensor-Status-Zeile (lokale
Bit-Konstanten statt MSP-Import, analog zum bestehenden navMode-Muster
in domain/telemetry/drone_status.dart, damit die UI protokollneutral
bleibt), Arming+Temperaturen-Zeilenpaar, Vertical-speed-Zeile am Ende.
Auf dem Pixel_10a-Emulator verifiziert: Sensor-Badges gruen/grau je nach
Bitmaske, Arming/Temperaturen-Paar, Vertical speed am Listenende.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Fills in MspFlightControllerLink.uploadMission(), which previously just
threw UnimplementedError, plus a new verifyMission() (both now on the
generic FlightControllerLink interface, protocol-neutral by signature -
MAVLink/ArduPilot get their own implementation later without touching
callers).
All iNAV-specific encoding lives in the new msp_waypoint_codec.dart:
- encodeMspSetWaypoint(): the 21-byte MSP_SET_WP payload. Action/P1/P2/P3
byte layout was checked against the actual iNAV 9.1.0 source
(navigation.c/navigation.h), not guessed - notably our generic `loiter`
action has no configurable duration, so it maps to
NAV_WP_ACTION_HOLD_TIME with the max representable p1 (int16 max, not
0xFFFF - that would read as -1 and end the hold immediately instead of
never).
- parseMspWpGetInfo(): decodes MSP_WP_GETINFO's validity/count fields,
used by verifyMission() to confirm the FC actually accepted the full
mission (Doku 2.2/4.5 Ready-to-Fly-Gate: "upload + verified").
uploadMission() sends one MSP_SET_WP per waypoint in order (iNAV has no
batch command - WP#1 resets the FC's mission list, every next number must
follow immediately, only the last carries NAV_WP_FLAG_LAST) and rejects
missions above NAV_MAX_WAYPOINTS upfront instead of silently truncating.
MissionSyncService now calls the real verifyMission() instead of always
confirming, throwing MissionVerificationException when the FC doesn't
confirm the mission.
FlyScreen's footer swaps the warnings button for a send button (Doku:
"ersetze den warnings button mit einem wp send button", pink horizontal
PaperPlaneIcon, matching the existing paper-plane drone iconography) -
warnings/event log stay reachable via the drone status pill's Warnings
tab. BottomStatsBar/MissionFooterBar gained onSendTap/sending in place of
the old forceShowWarningsButton.
Verified end to end on the Pixel_10a emulator: tapping send with WLAN as
the active connection type triggers the real WifiNetworkSpecifier flow
through MspFlightControllerLink (correctly reports "no devices found" -
expected, no real mLRS bridge on the emulator); the actual MSP_SET_WP/
MSP_WP_GETINFO wire behavior is covered by tests against a fake FC
responder over LoopbackTransport instead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Constantin Leue