Point the fly-mode rubber band at home during Return-to-Home

iNAV freezes activeWaypointIndex at whatever mission waypoint was
active when RTH engaged instead of updating it to reflect the new
target - navigation.c derives NAV_Status.activeWpIndex unconditionally
from posControl.activeWaypointIndex, and none of the RTH state-entry
handlers touch that field. Drawing the guidance line to that stale
index would point at a waypoint the aircraft may have already passed.

Extracted the target selection into computeRubberBandTarget() (mission
stats.dart) so the RTH special-case and the abort-back-to-waypoint-mode
fallback are unit-tested rather than only living inline in the widget
build method - since it re-evaluates navMode on every frame, aborting
RTH switches the line back to the mission waypoint with no extra
transition logic needed.

app/lib/domain/mission/mission_stats.dart

@@ -98,3 +98,41 @@ FlyMissionStatus? computeFlyMissionStatus({
     etaToActiveWaypointSec: eta,
   );
 }
+
+/// `MW_GPS_MODE_RTH` (siehe MspNavMode._modeNames in msp_telemetry_codec.dart).
+const navModeReturnToHome = 2;
+
+/// Ziel des Gummiband-Pfeils von der Drohne zum aktuellen Flugziel im
+/// Fly-Modus (Doku: MissionMap.rubberBandLine) - normalerweise der aktive
+/// Missionswegpunkt, waehrend Return-to-Home ([navModeReturnToHome])
+/// stattdessen [homePoint].
+///
+/// iNAV friert `activeWaypointIndex` beim RTH-Eintritt auf dem zuletzt
+/// aktiven Missionswegpunkt ein, statt ihn auf den Homepoint zu setzen
+/// (`navigation.c`: `NAV_Status.activeWpIndex` wird unbedingt aus
+/// `posControl.activeWaypointIndex` abgeleitet, keiner der
+/// `navOnEnteringState_NAV_STATE_RTH_*`-Handler fasst diesen Wert an) - ein
+/// Gummiband zu diesem (ggf. laengst passierten) Wegpunkt waere im RTH-Fall
+/// irrefuehrend. Da [navMode] bei jedem neuen Telemetrie-Frame neu geprueft
+/// wird, schaltet ein Abbruch von RTH zurueck in den Wegpunktmodus das
+/// Ergebnis von selbst wieder auf den Missionswegpunkt zurueck.
+///
+/// Liefert null, wenn kein sinnvolles Ziel bekannt ist (RTH ohne bereits
+/// abgefragten Homepoint, oder [activeWaypointIndex] ausserhalb der Liste).
+LatLng? computeRubberBandTarget({
+  required int navMode,
+  required int? activeWaypointIndex,
+  required List<Waypoint> waypoints,
+  LatLng? homePoint,
+}) {
+  if (navMode == navModeReturnToHome) {
+    return homePoint;
+  }
+  if (activeWaypointIndex == null ||
+      activeWaypointIndex < 0 ||
+      activeWaypointIndex >= waypoints.length) {
+    return null;
+  }
+  final target = waypoints[activeWaypointIndex];
+  return LatLng(target.lat, target.lon);
+}

app/lib/ui/screens/fly/fly_screen.dart

@@ -293,23 +293,25 @@ class _FlyScreenState extends ConsumerState<FlyScreen> {
                 child: const DroneMarkerIcon(),
               );
 
-    // Gestrichelte Linie von der Drohne zum aktiven Wegpunkt (Doku 3.4:
+    // Gestrichelte Linie von der Drohne zum aktuellen Flugziel (Doku 3.4:
     // TelemetryFrame.activeWaypointIndex aus MSP_NAV_STATUS) - derselbe
     // Darstellungsstil wie das Reticle-Gummiband im Plan-Modus (MissionMap.
-    // rubberBandLine), hier aber Drohne -> naechster Wegpunkt statt letzter
-    // Wegpunkt -> Kartenmitte.
-    List<LatLng>? rubberBand;
+    // rubberBandLine), hier aber Drohne -> Flugziel statt letzter Wegpunkt
+    // -> Kartenmitte. Das Ziel selbst (Missionswegpunkt oder bei Return-to-
+    // Home der Homepoint) kommt aus computeRubberBandTarget, siehe dortige
+    // Doku fuer den RTH-Sonderfall.
     final activeWpIndex = telemetry?.activeWaypointIndex;
-    if (telemetry != null &&
-        telemetry.hasFix &&
-        activeWpIndex != null &&
-        activeWpIndex >= 0 &&
-        activeWpIndex < waypoints.length) {
-      final target = waypoints[activeWpIndex];
-      rubberBand = [
-        LatLng(telemetry.lat, telemetry.lon),
-        LatLng(target.lat, target.lon),
-      ];
+    List<LatLng>? rubberBand;
+    if (telemetry != null && telemetry.hasFix) {
+      final target = computeRubberBandTarget(
+        navMode: telemetry.navMode,
+        activeWaypointIndex: activeWpIndex,
+        waypoints: waypoints,
+        homePoint: homePoint == null ? null : LatLng(homePoint.lat, homePoint.lon),
+      );
+      if (target != null) {
+        rubberBand = [LatLng(telemetry.lat, telemetry.lon), target];
+      }
     }
 
     // Live-Missionsstatus fuer die Details-Pille (Doku: "aktiver Wegpunkt

app/test/domain/mission_stats_test.dart

@@ -1,6 +1,7 @@
 import 'package:dmc_app/domain/mission/mission_stats.dart';
 import 'package:dmc_app/domain/waypoint/flat_waypoint_list.dart';
 import 'package:flutter_test/flutter_test.dart';
+import 'package:latlong2/latlong.dart';
 
 Waypoint _wp(double lat, double lon, {double speed = 15}) =>
     Waypoint(lat: lat, lon: lon, altitudeM: 60, speedMs: speed, catchRadiusM: 60);
@@ -110,4 +111,80 @@ void main() {
       expect(status!.etaToActiveWaypointSec, isNull);
     });
   });
+
+  group('computeRubberBandTarget', () {
+    final waypoints = [_wp(0, 0), _wp(0, 0.01), _wp(0, 0.02)];
+    const home = LatLng(1, 1);
+
+    test('zeigt normalerweise auf den aktiven Missionswegpunkt', () {
+      final target = computeRubberBandTarget(
+        navMode: 3, // Waypoint mission
+        activeWaypointIndex: 1,
+        waypoints: waypoints,
+        homePoint: home,
+      );
+      expect(target, const LatLng(0, 0.01));
+    });
+
+    test('zeigt bei Return-to-Home (navMode 2) auf den Homepoint statt auf '
+        'den (ggf. laengst passierten) eingefrorenen Missionswegpunkt', () {
+      final target = computeRubberBandTarget(
+        navMode: navModeReturnToHome,
+        activeWaypointIndex: 1,
+        waypoints: waypoints,
+        homePoint: home,
+      );
+      expect(target, home);
+    });
+
+    test('liefert null bei RTH ohne bekannten Homepoint statt eines '
+        'erfundenen Ziels', () {
+      final target = computeRubberBandTarget(
+        navMode: navModeReturnToHome,
+        activeWaypointIndex: 1,
+        waypoints: waypoints,
+        homePoint: null,
+      );
+      expect(target, isNull);
+    });
+
+    test('schaltet nach Abbruch von RTH (navMode wieder 3) automatisch '
+        'zurueck auf den Missionswegpunkt', () {
+      const rth = 2;
+      final duringRth = computeRubberBandTarget(
+        navMode: rth,
+        activeWaypointIndex: 1,
+        waypoints: waypoints,
+        homePoint: home,
+      );
+      final afterAbort = computeRubberBandTarget(
+        navMode: 3,
+        activeWaypointIndex: 1,
+        waypoints: waypoints,
+        homePoint: home,
+      );
+      expect(duringRth, home);
+      expect(afterAbort, const LatLng(0, 0.01));
+    });
+
+    test('activeWaypointIndex null oder ausserhalb der Liste ergibt null '
+        '(ausserhalb RTH)', () {
+      expect(
+        computeRubberBandTarget(
+          navMode: 3,
+          activeWaypointIndex: null,
+          waypoints: waypoints,
+        ),
+        isNull,
+      );
+      expect(
+        computeRubberBandTarget(
+          navMode: 3,
+          activeWaypointIndex: 3,
+          waypoints: waypoints,
+        ),
+        isNull,
+      );
+    });
+  });
 }